07-27-2009, 04:32 PM
|
Newbie
Recruit
|
|
Join Date: Jun 2009
Location: essex uk
Posts: 7
|
|
pulse excutive problem
Hi guys...i already have two excutive liners that i love,they run smooth and consistant...i recently ordered a new excutive with the new vice grip from pulse.... and for some reason it runs like a dog!..ive tinkered with it but cant get it to run sweet...it makes alot more noise than my others and sounds abit like the A bar is deflecting...it has that rough sound...I could do without the hassle of sending it back to the usa so im open to any suggestions from the machine experts on here?
cheers guys
|
07-28-2009, 10:59 AM
|
|
(.)(.) giggidy giggidy
Field Marshal
|
|
Join Date: May 2008
Location: a van down by the river
Posts: 1,116
|
|
Re: pulse excutive problem
wow, well thats a hard problem to fix without it sitting in front of me, but if you have a descent meter from critical or eikon it would help for sure. sounds to me like maybe the a-bar is hitting the rear coil. if you have more than one, and they run good, then look at them and find out what the difference is. you should still call them and let them know whats up.
|
07-28-2009, 03:27 PM
|
Newbie
Recruit
|
|
Join Date: Jun 2009
Location: essex uk
Posts: 7
|
|
Re: pulse excutive problem
Quote:
Originally Posted by travelingtom
wow, well thats a hard problem to fix without it sitting in front of me, but if you have a descent meter from critical or eikon it would help for sure. sounds to me like maybe the a-bar is hitting the rear coil. if you have more than one, and they run good, then look at them and find out what the difference is. you should still call them and let them know whats up.
|
Cheers for the reply buddy...had a good look at it today and the gap between a bar and rear coil is the smallest ive yet seen on a machine!..gonna mess about with it tomorrow maybe remove a shim from rear coil or add one to the front coil...Thanks for the pointer.
|
07-29-2009, 07:28 AM
|
|
(.)(.) giggidy giggidy
Field Marshal
|
|
Join Date: May 2008
Location: a van down by the river
Posts: 1,116
|
|
Re: pulse excutive problem
Quote:
Originally Posted by forbidden ink
Cheers for the reply buddy...had a good look at it today and the gap between a bar and rear coil is the smallest ive yet seen on a machine!..gonna mess about with it tomorrow maybe remove a shim from rear coil or add one to the front coil...Thanks for the pointer.
|
make sure the a-bar is over both the front and rear coil as well. it could also be caused by the amount of spring tension.i always keep a s&!t ton of springs laying around
|
07-29-2009, 11:06 AM
|
|
Senior Member
Corporal
|
|
Join Date: Sep 2008
Location: Baraboo,WI
Posts: 159
|
|
Re: pulse excutive problem
Quote:
Originally Posted by travelingtom
make sure the a-bar is over both the front and rear coil as well. it could also be caused by the amount of spring tension.i always keep a s&!t ton of springs laying around
|
yeah i put a 20 on back of my Belmont an it ran a lil doggy" i set Vltge higher to finish my work and it was sounding like a miniature jackhammer. I put an 18 on it and toned it down an now sounds like a Bumblebee...smooth and fast!
|
07-29-2009, 01:07 PM
|
Newbie
Recruit
|
|
Join Date: Jun 2009
Location: essex uk
Posts: 7
|
|
Re: pulse excutive problem
Had a play with it today before we opened...i think its got to be the front coil core...when the A bar is down its only touching a tiny part of it!...the wear mark on the underside of the A bar is tiny like a pin prick....could it be the A bar is hitting a peak and deflecting causing the noise ?...should i carefully take a file to the coil core?
I know i could send it back to pulse...but i want to try to solve this problem and learn from it!
|
07-30-2009, 10:19 AM
|
|
(.)(.) giggidy giggidy
Field Marshal
|
|
Join Date: May 2008
Location: a van down by the river
Posts: 1,116
|
|
Re: pulse excutive problem
Quote:
Originally Posted by forbidden ink
Had a play with it today before we opened...i think its got to be the front coil core...when the A bar is down its only touching a tiny part of it!...the wear mark on the underside of the A bar is tiny like a pin prick....could it be the A bar is hitting a peak and deflecting causing the noise ?...should i carefully take a file to the coil core?
I know i could send it back to pulse...but i want to try to solve this problem and learn from it!
|
f@#k NO DON"T TAKE A FILE TO IT!!!!!!!!!!! use shims to get it to hit flush, either take some out or put some in, but if you take a file to the coil, i'll smash your fingers with a sinder block!!!!!!!
|
07-30-2009, 03:09 PM
|
|
Senior Member
Corporal
|
|
Join Date: Feb 2008
Location: Memphis,TN
Posts: 497
|
|
Re: pulse excutive problem
send it back to pulse. They're a reputable company and given the amount of machines they produce, there's bound to be a bad one here or there. f@#king with the machine yourself will only cause more problems than necessary.
|
07-31-2009, 09:33 AM
|
|
(.)(.) giggidy giggidy
Field Marshal
|
|
Join Date: May 2008
Location: a van down by the river
Posts: 1,116
|
|
Re: pulse excutive problem
Quote:
Originally Posted by -42-
send it back to pulse. They're a reputable company and given the amount of machines they produce, there's bound to be a bad one here or there. f@#king with the machine yourself will only cause more problems than necessary.
|
i agree if you have other machines to take its place, but thats not always the case. you should know how to fix your machines if they are running irregular.
|
07-31-2009, 01:06 PM
|
|
Senior Member
Field Marshal
|
|
Join Date: Feb 2006
Posts: 1,213
|
|
Re: pulse excutive problem
Quote:
Originally Posted by -42-
send it back to pulse. They're a reputable company and given the amount of machines they produce, there's bound to be a bad one here or there. f@#king with the machine yourself will only cause more problems than necessary.
|
or, it will teach you a great deal of the mystery behind machines, and give you a better understanding of the tools you use...given that you dont f@#k them up, yes. haha
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:49 PM.
| Home | Tattoos | Art | Publications | Messageboard | Links | Studio | Tattoo Articles | Driving Directions |
| New Pictures | Tattoo & Piercing Aftercare | Link to Us | Media |
All logos and trademarks in this site are property of their respective owner.
The comments are property of their posters, all the rest © 2004-2013 by All Or Nothing Tattoo And Art Gallery.
2569 S. Cobb Dr., Smyrna, Ga. 30080 - Phone: 770.435.9966
|